Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hubs

DT Swiss 240s Straightpull Road Front Hub
$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
Shimano Dura-Ace Track Hi-Flange Front Hub
$149.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Shimano Dura-Ace Track Hi-Flange Rear Hub
$169.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Hope Pro 2 & Pro 2 Evo 15mm Thru Axle Conversion Caps
$29.21
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Hope Pro 2 & Pro 2 Evo 20mm Through Axle Front Hub End Caps
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
Shimano ZEE Rear Freehub
$54.99 - $62.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.
Shimano SLX Front Hub
$24.99 - $43.99
- Series: SLX - HB-M7000 - Axle Type: QR - Axle Length: 100 - Axle Diameter: 17.5 - HB-M7010 - Axle Type: 15mm E-Thru - Axle Length: 100 - Axle Diameter: 14 - Spoke Holes: 32H - Spoke Hole Circle: 44/44 - Average Weight: 189g
Shimano Saint Rear Freehub (135mm)
$152.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
Shimano ZEE Front Hub
$51.99
Shimano's ZEE Front Hub starts you off on the right foot when building a stout DH-worthy wheel. It uses a 20mm through-axle and Shimano's Center Lock rotor mount. Aggressive riding punishes lesser gear, so the ZEE hub sports sealed, adjustable angular-contact bearings for season after season durability.
DT Swiss 240s MTB Center Lock Front Hub
$225.00 - $235.00
The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
Hope Pro 2 Evo Rear 12x142mm Conversion Kit
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
Bontrager Race Singlespeed Freehub
$24.99
• Replacement freehub body for Bontrager single speed hubs • Compatibility: Race single speed • Log onto the techsite for additional freehub body and model year information
Shimano Ultegra Hubs
$57.99 - $108.99
Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.
Salsa Fat Conversion Front Hub
$125.00
135/142mm features: - Forged shell with aluminum axle - 2 sealed cartridge bearings - Front disc spacing - Convertible 10 x 135mm QR/15 x 142mm Thru-Axle spacing - Thru Axle and Q/R Conversion end caps included - 135mm Flip-Off skewer included - 226 grams 150mm features - Forged shell with aluminum axle - 2 sealed cartridge bearings - 150mm OLD spacing using standard front brake disc alignment - Designed for use with the Rock Shox Bluto fork - Convertible 10 x 150mm QR/15 x 150mm Thru-Axle spacing - Thru Axle and Q/R Conversion end caps included - 150mm Flip-Off skewer included - 226 grams
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
SRAM X0 Rear Hub
$382.00
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
SRAM X0 Front Hub
$207.00
SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.
Shimano Alfine S7001 8-Speed Disc Brake Rear Hub
$229.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend
DT Swiss 240s Road Rear Hub
$430.00
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
Campagnolo Record Front Hub (32-hole)
$125.00
Campagnolo's Record hub is loved all over the world for its pro-level quality, super-smooth bearings and excellent durability. It features an oversize shell for premium stiffness and it's built with cold-forged aluminum to maximize strength and minimize weight. Plus, you can easily adjust the bearing preload with a simple turn of an Allen wrench — even while the wheel is still on your bike.
Shimano Saint Rear Hub
$161.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
Odyssey Antigram Rear Hub
$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible. SPECS - 2014-T6 forged aluminum hub shell - 6903RS sealed cartridge ball bearings - 9-T driver with 3-Pawn independent springs design and precision caged needle bearings - RHD/LHD switchable WEIGHTS - With 14mm Chromoly Axle: 14.5oz / 411g - MEASUREMENTS Drive Side - Effective Flange Diameter: 49mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 30mm - Non-Drive Side Flange to Center Distance: 30mm
Odyssey Antigram Hub Guards
$19.99
Designed specifically for use with Odyssey's Antigram FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
DT Swiss 350s Straightpull Road Front Hub
$105.00
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
DT Swiss 240s Straightpull Road Rear Hub
$339.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Odyssey Clutch Freecoaster Hub
$189.99
A traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment (can be adjusted without removing the rear wheel), and a plastic hub guard. FEATURES - Super-durable bearing arrangement throughout - Maximum strength axle design Unique external slack adjustment feature - Super-durable drag mechanism design GUARD OPTIONS - Plastic hub guard included (but optional to use) MEASUREMENTS - Drive Side Effective Flange Diameter: 56mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 27.5mm - Non-Drive Side Flange to Center Distance: 27.5mm
Odyssey Clutch Hub Guard
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
Page 1 of 4 Next page