Parts

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Sport Slick Teflon Shift Cable is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire 4/5mm Wedge Type Housing or Hose Guide Bag of 50

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible. - Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles - Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98 - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g

KMC, X11 GY/GY, Chain, Speed: 11, 5.5mm, Links: 118, Grey

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

Magura hs33/hs11 sleeve nut bag of 10 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.

For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.

Tom Dugan's signature Dugan tire features a fast center tread for park, street and dirt. - Dual ply casing

Mike Aitken's original signature seat size and shape.

Odyssey Big Stitch seat is just that, a durable black canvas seat with a big Slugger logo stitched on it. Subtle and tonal with red woven label detail. - Gender: Men's - Clamp Style: Pivotal

Origin-8's 1-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses. You get a bag of 10 spacers.

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter

- AL6061-T6 alloy seatpost clamp - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seat post and steel frame - 29.8mm for 27.2mm seat post and chromoly frame - 31.8mm for 27.2mm seat post and aluminum frame - 34.9mm for 30.9mm seat post and aluminum frame, or 31.6mm seat post and carbon frame - 16mm height

- Designed for caliper & cantilever brakes - Aluminum/composite construction - 23.8/24.2mm clamp - Brake release - 320g pair - SHIMANO Equivalent BL-R400

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

The Problem Solvers Up-Cup is a nice aluminum cup to replace a damaged or broken plastic non-drive side bottom bracket cup in a Shimano UN54 square-taper bottom bracket.

Converts quill style forks to use threadless stems.

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

Fits Profile Design's F-18 through F-22 Series armrests, providing a low profile mount for arm pads. - Construction: 6061-T6 Forged Aluminum - Availability: Two kits to choose from: 31.8mm for flip-up styles or available in 31.8 for non flip-up style. - Weight: 65-70g - Does not include bottom clamp